Datasheet

LPC111X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.2 — 26 March 2014 22 of 127
NXP Semiconductors
LPC1110/11/12/13/14/15
32-bit ARM Cortex-M0 microcontroller
SWCLK/PIO0_10/
SCK0/
CT16B0_MAT2
3
[3]
yes I I; PU SWCLK — Serial wire clock.
I/O - PIO0_10 — General purpose digital input/output pin.
I/O - SCK0 — Serial clock for SPI0.
O-CT16B0_MAT2 — Match output 2 for 16-bit timer 0.
R/PIO0_11/
AD0/CT32B0_MAT3
4
[4]
yes I I; PU R — Reserved. Configure for an alternate function in the
IOCONFIG block.
I/O - PIO0_11 — General purpose digital input/output pin.
I-AD0 — A/D converter, input 0.
O-CT32B0_MAT3 — Match output 3 for 32-bit timer 0.
PIO1_0 to PIO1_7 I/O Port 1 — Port 1 is a 12-bit I/O port with individual direction
and function controls for each bit. The operation of port 1 pins
depends on the function selected through the IOCONFIG
register block.
R/PIO1_0/
AD1/CT32B1_CAP0
7
[4]
yes I I; PU R — Reserved. Configure for an alternate function in the
IOCONFIG block.
I/O - PIO1_0 — General purpose digital input/output pin.
I-AD1 — A/D converter, input 1.
I-CT32B1_CAP0 — Capture input 0 for 32-bit timer 1.
R/PIO1_1/
AD2/CT32B1_MAT0
8
[4]
no O I; PU R — Reserved. Configure for an alternate function in the
IOCONFIG block.
I/O - PIO1_1 — General purpose digital input/output pin.
I-AD2 — A/D converter, input 2.
O-CT32B1_MAT0 — Match output 0 for 32-bit timer 1.
R/PIO1_2/
AD3/CT32B1_MAT1
9
[4]
no I I; PU R — Reserved. Configure for an alternate function in the
IOCONFIG block.
I/O - PIO1_2 — General purpose digital input/output pin.
I-AD3 — A/D converter, input 3.
O-CT32B1_MAT1 — Match output 1 for 32-bit timer 1.
SWDIO/PIO1_3/
AD4/CT32B1_MAT2
10
[4]
no I/O I; PU SWDIO — Serial wire debug input/output.
I/O - PIO1_3 — General purpose digital input/output pin.
I-AD4 — A/D converter, input 4.
O-CT32B1_MAT2 — Match output 2 for 32-bit timer 1.
PIO1_6/RXD/
CT32B0_MAT0
11
[3]
no I/O I; PU PIO1_6 — General purpose digital input/output pin.
I-RXD — Receiver input for UART.
O-CT32B0_MAT0 — Match output 0 for 32-bit timer 0.
PIO1_7/TXD/
CT32B0_MAT1
12
[3]
no I/O I; PU PIO1_7 — General purpose digital input/output pin.
O-TXD — Transmitter output for UART.
O-CT32B0_MAT1 — Match output 1 for 32-bit timer 0.
V
DD
15 - I - 3.3 V supply voltage to the internal regulator and the external
rail.
Table 5. LPC1100L series: LPC1112 pin description table (TSSOP20 with V
DDA
and V
SSA
pins) …continued
Symbol
Pin TSSOP20
Start
logic
input
Type Reset
state
[1]
Description