Datasheet

LPC1850_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 6.4 — 18 August 2014 9 of 150
NXP Semiconductors
LPC1850/30/20/10
32-bit ARM Cortex-M3 microcontroller
P1_1 R2 N1 K2 42
[2]
N; PU I/O GPIO0[8] — General purpose digital input/output pin. Boot pin
(see Table 5).
O CTOUT_7 — SCTimer/PWM output 7. Match output 3 of
timer 1.
I/O EMC_A6 — External memory address line 6.
- R — Function reserved.
- R — Function reserved.
I/O SSP0_MISO — Master In Slave Out for SSP0.
- R — Function reserved.
- R — Function reserved.
P1_2 R3 N2 K1 43
[2]
N; PU I/O GPIO0[9] — General purpose digital input/output pin. Boot pin
(see Table 5
).
O CTOUT_6 — SCTimer/PWM output 6. Match output 2 of
timer 1.
I/O EMC_A7 — External memory address line 7.
- R — Function reserved.
- R — Function reserved.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
- R — Function reserved.
- R — Function reserved.
P1_3 P5 M2 J1 44
[2]
N; PU I/O GPIO0[10] — General purpose digital input/output pin.
O CTOUT_8 — SCTimer/PWM output 8. Match output 0 of
timer 2.
- R — Function reserved.
O EMC_OE
— LOW active Output Enable signal.
O USB0_IND1 — USB0 port indicator LED control output 1.
I/O SSP1_MISO — Master In Slave Out for SSP1.
- R — Function reserved.
O SD_RST — SD/MMC reset signal for MMC4.4 card.
P1_4 T3 P2 J2 47
[2]
N; PU I/O GPIO0[11] — General purpose digital input/output pin.
O CTOUT_9 — SCTimer/PWM output 9. Match output 3 of
timer 3.
- R — Function reserved.
O EMC_BLS0
— LOW active Byte Lane select signal 0.
O USB0_IND0 — USB0 port indicator LED control output 0.
I/O SSP1_MOSI — Master Out Slave in for SSP1.
- R — Function reserved.
O SD_VOLT1 — SD/MMC bus voltage select output 1.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA180 TFBGA100 LQFP144 Reset state [1] Type
Description