Datasheet

LPC185X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.1 — 6 May 2014 22 of 148
NXP Semiconductors
LPC185x/3x/2x/1x
32-bit ARM Cortex-M3 microcontroller
P4_3 C2 - 7 10
[5]
N;
PU
I/O GPIO2[3] — General purpose digital input/output pin.
O CTOUT_3 — SCTimer/PWM output 3. Match output 3 of timer
0.
O LCD_VD2 — LCD data.
- R — Function reserved.
- R — Function reserved.
O LCD_VD21 — LCD data.
I/O U3_BAUD — Baud pin for USART3.
- R — Function reserved.
AI ADC0_0 — ADC0 and ADC1, input channel 0. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
P4_4 B1 - 9 14
[5]
N;
PU
I/O GPIO2[4] — General purpose digital input/output pin.
O CTOUT_2 — SCTimer/PWM output 2. Match output 2 of timer
0.
O LCD_VD1 — LCD data.
- R — Function reserved.
- R — Function reserved.
O LCD_VD20 — LCD data.
I/O U3_DIR — RS-485/EIA-485 output enable/direction control for
USART3.
- R — Function reserved.
AO DAC — DAC output. Configure the pin as GPIO input and use
the analog function select register in the SCU to select the
DAC.
P4_5 D2 - 10 15
[2]
N;
PU
I/O GPIO2[5] — General purpose digital input/output pin.
O CTOUT_5 — SCTimer/PWM output 5. Match output 3 of timer
3.
O LCD_FP — Frame pulse (STN). Vertical synchronization pulse
(TFT).
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP144 LQFP208 Reset state [1] Type
Description