Datasheet

LPC185X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.1 — 6 May 2014 32 of 148
NXP Semiconductors
LPC185x/3x/2x/1x
32-bit ARM Cortex-M3 microcontroller
P8_0 E5 - - 2
[3]
N;
PU
I/O GPIO4[0] — General purpose digital input/output pin.
I USB0_PWR_FAULT — Port power fault signal indicating
overcurrent condition; this signal monitors over-current on the
USB bus (external circuitry required to detect over-current
condition).
- R — Function reserved.
I MCI2 — Motor control PWM channel 2, input.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O T0_MAT0 — Match output 0 of timer 0.
P8_1 H5 - - 34
[3]
N;
PU
I/O GPIO4[1] — General purpose digital input/output pin.
O USB0_IND1 — USB0 port indicator LED control output 1.
- R — Function reserved.
I MCI1 — Motor control PWM channel 1, input.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O T0_MAT1 — Match output 1 of timer 0.
P8_2 K4 - - 36
[3]
N;
PU
I/O GPIO4[2] — General purpose digital input/output pin.
O USB0_IND0 — USB0 port indicator LED control output 0.
- R — Function reserved.
I MCI0 — Motor control PWM channel 0, input.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O T0_MAT2 — Match output 2 of timer 0.
P8_3 J3 - - 37
[2]
N;
PU
I/O GPIO4[3] — General purpose digital input/output pin.
I/O USB1_ULPI_D2 — ULPI link bidirectional data line 2.
- R — Function reserved.
O LCD_VD12 — LCD data.
O LCD_VD19 — LCD data.
- R — Function reserved.
- R — Function reserved.
O T0_MAT3 — Match output 3 of timer 0.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP144 LQFP208 Reset state [1] Type
Description