Datasheet

LPC2377_78 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 6.1 — 16 October 2013 58 of 69
NXP Semiconductors
LPC2377/78
Single-chip 16-bit/32-bit microcontrollers
Fig 22. Oscillator modes and models: oscillation mode of operation and external crystal
model used for C
X1
/C
X2
evaluation
Table 16. Recommended values for C
X1
/C
X2
in oscillation mode (crystal and external
components parameters): low frequency mode
Fundamental oscillation
frequency F
OSC
Crystal load
capacitance C
L
Maximum crystal
series resistance R
S
External load
capacitors C
X1
/C
X2
1 MHz to 5 MHz 10 pF < 300  18 pF, 18 pF
20 pF < 300  39 pF, 39 pF
30 pF < 300  57 pF, 57 pF
5 MHz to 10 MHz 10 pF < 300  18 pF, 18 pF
20 pF < 200  39 pF, 39 pF
30 pF < 100  57 pF, 57 pF
10 MHz to 15 MHz 10 pF < 160  18 pF, 18 pF
20 pF < 60  39 pF, 39 pF
15 MHz to 20 MHz 10 pF < 80  18 pF, 18 pF
Table 17. Recommended values for C
X1
/C
X2
in oscillation mode (crystal and external
components parameters): high frequency mode
Fundamental oscillation
frequency F
OSC
Crystal load
capacitance C
L
Maximum crystal
series resistance R
S
External load
capacitors C
X1
, C
X2
15 MHz to 20 MHz 10 pF < 180  18 pF, 18 pF
20 pF < 100  39 pF, 39 pF
20 MHz to 25 MHz 10 pF < 160  18 pF, 18 pF
20 pF < 80  39 pF, 39 pF
002aaf494
LPC2xxx
XTALIN XTALOUT
C
X2
C
X1
XTAL
=
C
L
C
P
R
S
L