Datasheet

LPC2387 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 5.1 — 16 October 2013 35 of 66
NXP Semiconductors
LPC2387
Single-chip 16-bit/32-bit MCU
8. Limiting values
[1] The following applies to the limiting values:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated
maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless
otherwise noted.
[2] Including voltage on outputs in 3-state mode.
[3] Not to exceed 4.6 V.
[4] The peak current is limited to 25 times the corresponding maximum current.
[5] The maximum non-operating storage temperature is different than the temperature for required shelf life which should be determined
based on required shelf lifetime. Please refer to the JEDEC specification (J-STD-033B.1) for further details.
[6] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit
V
DD(3V3)
supply voltage (3.3 V) core and external
rail
3.0 3.6 V
V
DD(DCDC)(3V3)
DC-to-DC converter supply voltage
(3.3 V)
3.0 3.6 V
V
DDA
analog 3.3 V pad supply voltage 0.5 +4.6 V
V
i(VBAT)
input voltage on pin VBAT for the RTC 0.5 +4.6 V
V
i(VREF)
input voltage on pin VREF 0.5 +4.6 V
V
IA
analog input voltage on ADC related
pins
0.5 +5.1 V
V
I
input voltage 5 V tolerant I/O
pins; only valid
when the V
DD(3V3)
supply voltage is
present
[2]
0.5 +6.0 V
other I/O pins
[2][3]
0.5 V
DD(3V3)
+ 0.5 V
I
DD
supply current per supply pin
[4]
- 100 mA
I
SS
ground current per ground pin
[4]
- 100 mA
T
stg
storage temperature non-operating
[5]
65 +150 C
P
tot(pack)
total power dissipation (per package) based on package
heat transfer, not
device power
consumption
-1.5W
V
ESD
electrostatic discharge voltage human body
model; all pins
[6]
2500 +2500 V