Datasheet

LPC2387 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 5.1 — 16 October 2013 61 of 66
NXP Semiconductors
LPC2387
Single-chip 16-bit/32-bit MCU
17. Revision history
Table 19. Revision history
Document ID Release date Data sheet status Change notice Supersedes
LPC2387 v.5.1 20131016 Product data sheet - LPC2387 v.5
Modifications:
• Table 3 “Pin description”, Table note 6: Changed glitch filter spec from 5 ns to 10 ns.
• Table 8 “Dynamic characteristics”: Changed min clock cycle time from 42 to 40.
LPC2387 v.5 20120109 Product data sheet - LPC2387 v.4
Modifications:
• Table 3 “Pin description”: Added Table note 7 “This pin has no built-in pull-up and no built-in
pull-down resistor.” for TCK and TDO pins.
• Table 3 “Pin description”: Added Table note 8 “This pin has a built-in pull-up resistor.” for
TMS, TDI, TRST, and RTCK pins.
• Table 3 “Pin description”: Updated description for USB_UP_LED.
• Added Table 6 “Thermal resistance value (C/W): ±15 %”.
• Table 4 “Limiting values”: Added “non-operating” to conditions column of T
stg
.
• Table 4 “Limiting values”: Updated Table note 5 “The maximum non-operating storage
temperature is different than the temperature for required shelf life which should be
determined based on required shelf lifetime. Please refer to the JEDEC specification
(J-STD-033B.1) for further details.”.
• Section 14.5 “Standard I/O pin configuration”: Updated bullets.