Datasheet
LPC2470 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 4.1 — 16 October 2013 12 of 91
NXP Semiconductors
LPC2470
Flashless 16-bit/32-bit microcontroller
P0[23]/AD0[0]/
I2SRX_CLK/
CAP3[0]
18
[3]
H1
[3]
I/O P0[23] — General purpose digital input/output pin.
I AD0[0] — A/D converter 0, input 0.
I/O I2SRX_CLK — Receive Clock. It is driven by the master and received by
the slave. Corresponds to the signal SCK in the I
2
S-bus specification.
I CAP3[0] — Capture input for Timer 3, channel 0.
P0[24]/AD0[1]/
I2SRX_WS/
CAP3[1]
16
[3]
G2
[3]
I/O P0[24] — General purpose digital input/output pin.
I AD0[1] — A/D converter 0, input 1.
I/O I2SRX_WS — Receive Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I
2
S-bus
specification.
I CAP3[1] — Capture input for Timer 3, channel 1.
P0[25]/AD0[2]/
I2SRX_SDA/
TXD3
14
[3]
F1
[3]
I/O P0[25] — General purpose digital input/output pin.
I AD0[2] — A/D converter 0, input 2.
I/O I2SRX_SDA — Receive data. It is driven by the transmitter and read by
the receiver. Corresponds to the signal SD in the I
2
S-bus specification.
O TXD3 — Transmitter output for UART3.
P0[26]/AD0[3]/
AOUT/RXD3
12
[3][4]
E1
[3][4]
I/O P0[26] — General purpose digital input/output pin.
I AD0[3] — A/D converter 0, input 3.
O AOUT — D/A converter output.
I RXD3 — Receiver input for UART3.
P0[27]/SDA0 50
[5]
T1
[5]
I/O P0[27] — General purpose digital input/output pin.
I/O SDA0 — I
2
C0 data input/output. Open-drain output (for I
2
C-bus
compliance).
P0[28]/SCL0 48
[5]
R3
[5]
I/O P0[28] — General purpose digital input/output pin.
I/O SCL0 — I
2
C0 clock input/output. Open-drain output (for I
2
C-bus
compliance).
P0[29]/USB_D+1 61
[6]
U4
[6]
I/O P0[29] — General purpose digital input/output pin.
I/O USB_D+1 — USB port 1 bidirectional D+ line.
P0[30]/USB_D162
[6]
R6
[6]
I/O P0[30] — General purpose digital input/output pin.
I/O USB_D1 — USB port 1 bidirectional D line.
P0[31]/USB_D+2 51
[6]
T2
[6]
I/O P0[31] — General purpose digital input/output pin.
I/O USB_D+2 — USB port 2 bidirectional D+ line.
P1[0] to P1[31] I/O Port 1: Port 1 is a 32 bit I/O port with individual direction controls for each
bit. The operation of port 1 pins depends upon the pin function selected
via the pin connect block.
P1[0]/
ENET_TXD0
196
[1]
A3
[1]
I/O P1[0] — General purpose digital input/output pin.
O ENET_TXD0 — Ethernet transmit data 0 (RMII/MII interface).
P1[1]/
ENET_TXD1
194
[1]
B5
[1]
I/O P1[1] — General purpose digital input/output pin.
O ENET_TXD1 — Ethernet transmit data 1 (RMII/MII interface).
P1[2]/
ENET_TXD2/
MCICLK/
PWM0[1]
185
[1]
D9
[1]
I/O P1[2] — General purpose digital input/output pin.
O ENET_TXD2 — Ethernet transmit data 2 (MII interface).
O MCICLK — Clock output line for SD/MMC interface.
O PWM0[1] — Pulse Width Modulator 0, output 1.
Table 4. Pin description
…continued
Symbol Pin Ball Type Description