Datasheet

LPC2470 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 4.1 — 16 October 2013 28 of 91
NXP Semiconductors
LPC2470
Flashless 16-bit/32-bit microcontroller
7.4 Interrupt controller
The ARM processor core has two interrupt inputs called Interrupt ReQuest (IRQ) and Fast
Interrupt ReQuest (FIQ). The VIC takes 32 interrupt request inputs which can be
programmed as FIQ or vectored IRQ types. The programmable assignment scheme
means that priorities of interrupts from the various peripherals can be dynamically
assigned and adjusted.
FIQs have the highest priority. If more than one request is assigned to FIQ, the VIC ORs
the requests to produce the FIQ signal to the ARM processor. The fastest possible FIQ
latency is achieved when only one request is classified as FIQ, because then the FIQ
Fig 4. LPC2470 memory map
0.0 GB
1.0 GB
0x0000 0000
RESERVED ADDRESS SPACE
SPECIAL REGISTERS
ON-CHIP STATIC RAM
RESERVED ADDRESS SPACE
0x4000 0000
0x3FFF 8000
0x3FFF FFFF
2.0 GB 0x8000 0000
0x7FFF FFFF
BOOT ROM
3.75 GB
4.0 GB
3.5 GB
AHB PERIPHERALS
APB PERIPHERALS
0xE000 0000
0xF000 0000
0xFFFF FFFF
002aad316
EXTERNAL STATIC AND DYNAMIC MEMORY