Datasheet

LPC2470 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 4.1 — 16 October 2013 86 of 91
NXP Semiconductors
LPC2470
Flashless 16-bit/32-bit microcontroller
17. Revision history
Table 26. Revision history
Document ID Release date Data sheet status Change notice Supersedes
LPC2470 v.4.1 20131016 Product data sheet - LPC2470 v.4
Modifications:
• Table 4 “Pin description”, Table note 9: Changed glitch filter spec from 5 ns to 10 ns.
• Table 10 “Dynamic characteristics”: Changed min clock cycle time from 42 to 40.
• Table 16 “Dynamic characteristics: Dynamic external memory interface”: Changed t
d(QV)
typ
and max.
LPC2470 v.4 20110908 Product data sheet - LPC2470 v.3
Modifications:
• Table 4 “Pin description”: Updated description for USB_UP_LED1 and USB_UP_LED2.
• Table 6 “Limiting values”: Added “non-operating” to conditions column of T
stg
.
• Table 6 “Limiting values”: Updated Table note [5].
• Table 8 “Thermal resistance value (C/W): ±15 %”: Added new table.
• Table 14 “Dynamic characteristics: Static external memory interface”: Removed “AHB clock
= 1 MHz”.
• Table 14 “Dynamic characteristics: Static external memory interface”: Swapped min/max
values for t
am
.
• Table 14 “Dynamic characteristics: Static external memory interface”: Updated t
WEHDNV
spec.
• Table 15 “Dynamic characteristics: Dynamic external memory interface”: Removed “AHB
clock = 1 MHz”.
• Table 16 “Dynamic characteristics: Dynamic external memory interface”: Added new table.
• Section 14.7 “Standard I/O pin configuration” Updated bullets.