Datasheet

LPC4350_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.2 — 18 August 2014 15 of 155
NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
P1_20 M10 J10 K10 70
[2]
N;
PU
I/O GPIO0[15] — General purpose digital input/output pin.
I/O SSP1_SSEL — Slave Select for SSP1.
- R — Function reserved.
O ENET_TXD1 — Ethernet transmit data 1 (RMII/MII interface).
I T0_CAP2 — Capture input 2 of timer 0.
- R — Function reserved.
I/O SGPIO13 — General purpose digital input/output pin.
- R — Function reserved.
P2_0 T16 N14 G10 75
[2]
N;
PU
I/O SGPIO4 — General purpose digital input/output pin.
O U0_TXD — Transmitter output for USART0.
I/O EMC_A13 — External memory address line 13.
O USB0_PPWR — VBUS drive signal (towards external charge
pump or power management unit); indicates that VBUS must
be driven (active HIGH).
Add a pull-down resistor to disable the power switch at reset.
This signal has opposite polarity compared to the USB_PPWR
used on other NXP LPC parts.
I/O GPIO5[0] — General purpose digital input/output pin.
- R — Function reserved.
I T3_CAP0 — Capture input 0 of timer 3.
O ENET_MDC — Ethernet MIIM clock.
P2_1 N15 M13 G7 81
[2]
N;
PU
I/O SGPIO5 — General purpose digital input/output pin.
I U0_RXD — Receiver input for USART0.
I/O EMC_A12 — External memory address line 12.
I USB0_PWR_FAULT — Port power fault signal indicating
overcurrent condition; this signal monitors over-current on the
USB bus (external circuitry required to detect over-current
condition).
I/O GPIO5[1] — General purpose digital input/output pin.
- R — Function reserved.
I T3_CAP1 — Capture input 1 of timer 3.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA180 TFBGA100 LQFP144 Reset state [1] Type
Description