Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 21 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
P3_2 F11 G6 166 116
[2]
OL;
PU
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the signal
SD in the I
2
S-bus specification.
I/O I2S0_RX_SDA — I2S Receive data. It is driven by the
transmitter and read by the receiver. Corresponds to the signal
SD in the I
2
S-bus specification.
O CAN0_TD — CAN transmitter output.
O USB1_IND0 — USB1 Port indicator LED control output 0.
I/O GPIO5[9] — General purpose digital input/output pin.
- R — Function reserved.
O LCD_VD14 — LCD data.
- R — Function reserved.
P3_3 B14 A7 169 118
[4]
N;
PU
- R — Function reserved.
I/O SPI_SCK — Serial clock for SPI.
I/O SSP0_SCK — Serial clock for SSP0.
O SPIFI_SCK — Serial clock for SPIFI.
O CGU_OUT1 — CGU spare clock output 1.
- R — Function reserved.
O I2S0_TX_MCLK — I2S transmit master clock.
I/O I2S1_TX_SCK — Transmit Clock. It is driven by the master
and received by the slave. Corresponds to the signal SCK in
the I
2
S-bus specification.
P3_4 A15 B8 171 119
[2]
N;
PU
I/O GPIO1[14] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
I/O SPIFI_SIO3 — I/O lane 3 for SPIFI.
O U1_TXD — Transmitter output for UART 1.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by the
master and received by the slave. Corresponds to the signal
WS in the I
2
S-bus specification.
I/O I2S1_RX_SDA — I2S1 Receive data. It is driven by the
transmitter and read by the receiver. Corresponds to the signal
SD in the I
2
S-bus specification.
O LCD_VD13 — LCD data.
Table 3. Pin description …continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description