Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 32 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
P7_2 A16 - 165 115
[2]
N;
PU
I/O GPIO3[10] — General purpose digital input/output pin.
I CTIN_4 — SCT input 4. Capture input 2 of timer 1.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the signal
SD in the I
2
S-bus specification.
O LCD_VD18 — LCD data.
O LCD_VD6 — LCD data.
- R — Function reserved.
I U2_RXD — Receiver input for USART2.
I/O SGPIO6 — General purpose digital input/output pin.
P7_3 C13 - 167 117
[2]
N;
PU
I/O GPIO3[11] — General purpose digital input/output pin.
I CTIN_3 — SCT input 3. Capture input 1 of timer 1.
- R — Function reserved.
O LCD_VD17 — LCD data.
O LCD_VD5 — LCD data.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
P7_4 C8 - 189 132
[5]
N;
PU
I/O GPIO3[12] — General purpose digital input/output pin.
O CTOUT_13 — SCT output 13. Match output 3 of timer 3.
- R — Function reserved.
O LCD_VD16 — LCD data.
O LCD_VD4 — LCD data.
O TRACEDATA[0] — Trace data, bit 0.
- R — Function reserved.
- R — Function reserved.
AI ADC0_4 — ADC0 and ADC1, input channel 4. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
P7_5 A7 - 191 133
[5]
N;
PU
I/O GPIO3[13] — General purpose digital input/output pin.
O CTOUT_12 — SCT output 12. Match output 3 of timer 3.
- R — Function reserved.
O LCD_VD8 — LCD data.
O LCD_VD23 — LCD data.
O TRACEDATA[1] — Trace data, bit 1.
- R — Function reserved.
- R — Function reserved.
AI ADC0_3 — ADC0 and ADC1, input channel 3. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description