Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 42 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
PC_6 H6 - 22 -
[2]
N;
PU
- R — Function reserved.
I/O USB1_ULPI_D2 — ULPI link bidirectional data line 2.
- R — Function reserved.
I ENET_RXD2 — Ethernet receive data 2 (MII interface).
I/O GPIO6[5] — General purpose digital input/output pin.
- R — Function reserved.
I T3_CAP3 — Capture input 3 of timer 3.
I/O SD_DAT2 — SD/MMC data bus line 2.
PC_7 G5 - - -
[2]
N;
PU
- R — Function reserved.
I/O USB1_ULPI_D1 — ULPI link bidirectional data line 1.
- R — Function reserved.
I ENET_RXD3 — Ethernet receive data 3 (MII interface).
I/O GPIO6[6] — General purpose digital input/output pin.
- R — Function reserved.
O T3_MAT0 — Match output 0 of timer 3.
I/O SD_DAT3 — SD/MMC data bus line 3.
PC_8 N4 - - -
[2]
N;
PU
- R — Function reserved.
I/O USB1_ULPI_D0 — ULPI link bidirectional data line 0.
- R — Function reserved.
I ENET_RX_DV — Ethernet Receive Data Valid (RMII/MII
interface).
I/O GPIO6[7] — General purpose digital input/output pin.
- R — Function reserved.
O T3_MAT1 — Match output 1 of timer 3.
I SD_CD — SD/MMC card detect input.
PC_9 K2 - - -
[2]
N;
PU
- R — Function reserved.
I USB1_ULPI_NXT — ULPI link NXT signal. Data flow control
signal from the PHY.
- R — Function reserved.
I ENET_RX_ER — Ethernet receive error (MII interface).
I/O GPIO6[8] — General purpose digital input/output pin.
- R — Function reserved.
O T3_MAT2 — Match output 2 of timer 3.
O SD_POW — SD/MMC power monitor output.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description