Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 43 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
PC_10 M5 - - -
[2]
N;
PU
- R — Function reserved.
O USB1_ULPI_STP — ULPI link STP signal. Asserted to end or
interrupt transfers to the PHY.
I U1_DSR — Data Set Ready input for UART 1.
- R — Function reserved.
I/O GPIO6[9] — General purpose digital input/output pin.
- R — Function reserved.
O T3_MAT3 — Match output 3 of timer 3.
I/O SD_CMD — SD/MMC command signal.
PC_11 L5 - - -
[2]
N;
PU
- R — Function reserved.
I USB1_ULPI_DIR — ULPI link DIR signal. Controls the ULPI
data line direction.
I U1_DCD — Data Carrier Detect input for UART 1.
- R — Function reserved.
I/O GPIO6[10] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
I/O SD_DAT4 — SD/MMC data bus line 4.
PC_12 L6 - - -
[2]
N;
PU
- R — Function reserved.
- R — Function reserved.
O U1_DTR — Data Terminal Ready output for UART 1. Can also
be configured to be an RS-485/EIA-485 output enable signal
for UART 1.
- R — Function reserved.
I/O GPIO6[11] — General purpose digital input/output pin.
I/O SGPIO11 — General purpose digital input/output pin.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the signal
SD in the I
2
S-bus specification.
I/O SD_DAT5 — SD/MMC data bus line 5.
PC_13 M1 - - -
[2]
N;
PU
- R — Function reserved.
- R — Function reserved.
O U1_TXD — Transmitter output for UART 1.
- R — Function reserved.
I/O GPIO6[12] — General purpose digital input/output pin.
I/O SGPIO12 — General purpose digital input/output pin.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by the
master and received by the slave. Corresponds to the signal
WS in the I
2
S-bus specification.
I/O SD_DAT6 — SD/MMC data bus line 6.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description