Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 49 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
PE_2 M14 - 115 -
[2]
N;
PU
I ADCTRIG0 — ADC trigger input 0.
I CAN0_RD — CAN receiver input.
- R — Function reserved.
I/O EMC_A20 — External memory address line 20.
I/O GPIO7[2] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_3 K12 - 118 -
[2]
N;
PU
- R — Function reserved.
O CAN0_TD — CAN transmitter output.
I ADCTRIG1 — ADC trigger input 1.
I/O EMC_A21 — External memory address line 21.
I/O GPIO7[3] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_4 K13 - 120 -
[2]
N;
PU
- R — Function reserved.
I NMI — External interrupt input to NMI.
- R — Function reserved.
I/O EMC_A22 — External memory address line 22.
I/O GPIO7[4] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_5 N16 - 122 -
[2]
N;
PU
- R — Function reserved.
O CTOUT_3 — SCT output 3. Match output 3 of timer 0.
O U1_RTS — Request to Send output for UART 1. Can also be
configured to be an RS-485/EIA-485 output enable signal for
UART 1.
I/O EMC_D24 — External memory data line 24.
I/O GPIO7[5] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description