Datasheet

LPC435X_3X_2X_1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 19 August 2014 55 of 158
NXP Semiconductors
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
PF_9 D6 - 203 -
[5]
N;
PU
- R — Function reserved.
I/O U0_DIR — RS-485/EIA-485 output enable/direction control for
USART0.
O CTOUT_1 — SCT output 1. Match output 3 of timer 3.
- R — Function reserved.
I/O GPIO7[23] — General purpose digital input/output pin.
- R — Function reserved.
I/O SGPIO3 — General purpose digital input/output pin.
- R — Function reserved.
AI ADC1_2 — ADC1 and ADC0, input channel 2. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
PF_10 A3 - 205 -
[5]
N;
PU
- R — Function reserved.
O U0_TXD — Transmitter output for USART0.
- R — Function reserved.
- R — Function reserved.
I/O GPIO7[24] — General purpose digital input/output pin.
- R — Function reserved.
I SD_WP — SD/MMC card write protect input.
- R — Function reserved.
AI ADC0_5 — ADC0 and ADC1, input channel 5. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
PF_11 A2 - 207 -
[5]
N;
PU
- R — Function reserved.
I U0_RXD — Receiver input for USART0.
- R — Function reserved.
- R — Function reserved.
I/O GPIO7[25] — General purpose digital input/output pin.
- R — Function reserved.
O SD_VOLT2 — SD/MMC bus voltage select output 2.
- R — Function reserved.
AI ADC1_5 — ADC1 and ADC0, input channel 5. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
Table 3. Pin description
…continued
Pin name
LBGA256 TFBGA100 LQFP208 LQFP144 Reset state [1] Type
Description