Datasheet

LPC4350_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.2 — 18 August 2014 29 of 155
NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
P6_5 P16 L14 F9 82
[2]
N;
PU
I/O GPIO3[4] — General purpose digital input/output pin.
O CTOUT_6 — SCTimer/PWM output 6. Match output 2 of timer
1.
I U0_RXD — Receiver input for USART0.
O EMC_RAS
— LOW active SDRAM Row Address Strobe.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
P6_6 L14 K12 - 83
[2]
N;
PU
I/O GPIO0[5] — General purpose digital input/output pin.
O EMC_BLS1
— LOW active Byte Lane select signal 1.
I/O SGPIO5 — General purpose digital input/output pin.
I USB0_PWR_FAULT — Port power fault signal indicating
overcurrent condition; this signal monitors over-current on the
USB bus (external circuitry required to detect over-current
condition).
- R — Function reserved.
I T2_CAP3 — Capture input 3 of timer 2.
- R — Function reserved.
- R — Function reserved.
P6_7 J13 H11 - 85
[2]
N;
PU
- R — Function reserved.
I/O EMC_A15 — External memory address line 15.
I/O SGPIO6 — General purpose digital input/output pin.
O USB0_IND1 — USB0 port indicator LED control output 1.
I/O GPIO5[15] — General purpose digital input/output pin.
O T2_MAT0 — Match output 0 of timer 2.
- R — Function reserved.
- R — Function reserved.
P6_8 H13 F12 - 86
[2]
N;
PU
- R — Function reserved.
I/O EMC_A14 — External memory address line 14.
I/O SGPIO7 — General purpose digital input/output pin.
O USB0_IND0 — USB0 port indicator LED control output 0.
I/O GPIO5[16] — General purpose digital input/output pin.
O T2_MAT1 — Match output 1 of timer 2.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA180 TFBGA100 LQFP144 Reset state [1] Type
Description