Datasheet

LPC4350_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.2 — 18 August 2014 33 of 155
NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
P7_7 B6 D5 - 140
[5]
N;
PU
I/O GPIO3[15] — General purpose digital input/output pin.
O CTOUT_8 — SCTimer/PWM output 8. Match output 0 of timer
2.
- R — Function reserved.
O LCD_PWR — LCD panel power enable.
- R — Function reserved.
O TRACEDATA[3] — Trace data, bit 3.
O ENET_MDC — Ethernet MIIM clock.
I/O SGPIO7 — General purpose digital input/output pin.
AI ADC1_6 — ADC1 and ADC0, input channel 6. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
P8_0 E5 E4 - -
[3]
N;
PU
I/O GPIO4[0] — General purpose digital input/output pin.
I USB0_PWR_FAULT — Port power fault signal indicating
overcurrent condition; this signal monitors over-current on the
USB bus (external circuitry required to detect over-current
condition).
- R — Function reserved.
I MCI2 — Motor control PWM channel 2, input.
I/O SGPIO8 — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
O T0_MAT0 — Match output 0 of timer 0.
P8_1 H5 G4 - -
[3]
N;
PU
I/O GPIO4[1] — General purpose digital input/output pin.
O USB0_IND1 — USB0 port indicator LED control output 1.
- R — Function reserved.
I MCI1 — Motor control PWM channel 1, input.
I/O SGPIO9 — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
O T0_MAT1 — Match output 1 of timer 0.
P8_2 K4 J4 - -
[3]
N;
PU
I/O GPIO4[2] — General purpose digital input/output pin.
O USB0_IND0 — USB0 port indicator LED control output 0.
- R — Function reserved.
I MCI0 — Motor control PWM channel 0, input.
I/O SGPIO10 — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
O T0_MAT2 — Match output 2 of timer 0.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA180 TFBGA100 LQFP144 Reset state [1] Type
Description