Datasheet

LPC4350_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.2 — 18 August 2014 37 of 155
NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
P9_6 L11 M9 - 72
[2]
N;
PU
I/O GPIO4[11] — General purpose digital input/output pin.
O MCOB1 — Motor control PWM channel 1, output B.
I USB1_PWR_FAULT — USB1 Port power fault signal
indicating over-current condition; this signal monitors
over-current on the USB1 bus (external circuitry required to
detect over-current condition).
- R — Function reserved.
- R — Function reserved.
I ENET_COL — Ethernet Collision detect (MII interface).
I/O SGPIO8 — General purpose digital input/output pin.
I U0_RXD — Receiver input for USART0.
PA_0 L12 L10 - -
[2]
N;
PU
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O I2S1_RX_MCLK — I2S1 receive master clock.
O CGU_OUT1 — CGU spare clock output 1.
- R — Function reserved.
PA_1 J14 H12 - -
[3]
N;
PU
I/O GPIO4[8] — General purpose digital input/output pin.
I QEI_IDX — Quadrature Encoder Interface INDEX input.
- R — Function reserved.
O U2_TXD — Transmitter output for USART2.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PA_2 K15 J13 - -
[3]
N;
PU
I/O GPIO4[9] — General purpose digital input/output pin.
I QEI_PHB — Quadrature Encoder Interface PHB input.
- R — Function reserved.
I U2_RXD — Receiver input for USART2.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA180 TFBGA100 LQFP144 Reset state [1] Type
Description