Datasheet

LPC4350_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 4.2 — 18 August 2014 86 of 155
NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
8. Limiting values
[1] The following applies to the limiting values:
a) This product includes circuitry designed for the protection of its internal devices from the damaging effects of excessive static
charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless
otherwise noted.
[2] Including voltage on outputs in 3-state mode.
[3] The peak current is limited to 25 times the corresponding maximum current.
[4] Dependent on package type.
[5] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit
V
DD(REG)(3V3)
regulator supply voltage
(3.3 V)
on pin VDDREG 0.5 3.6 V
V
DD(IO)
input/output supply
voltage
on pin VDDIO 0.5 3.6 V
V
DDA(3V3)
analog supply voltage
(3.3 V)
on pin VDDA 0.5 3.6 V
V
BAT
battery supply voltage on pin VBAT 0.5 3.6 V
V
prog(pf)
polyfuse programming
voltage
on pin VPP 0.5 3.6 V
V
I
input voltage only valid when V
DD(IO)
 2.2 V
5 V tolerant I/O pins
[2]
0.5 5.5 V
ADC/DAC pins and digital I/O
pins configured for an analog
function
0.5 V
DDA(3V3)
V
USB0 pins USB0_DP;
USB0_DM;USB0_VBUS
0.3 5.25 V
USB0 pins USB0_ID;
USB0_RREF
0.3 3.6 V
USB1 pins USB1_DP and
USB1_DM
0.3 5.25 V
I
DD
supply current per supply pin
[3]
- 100 mA
I
SS
ground current per ground pin
[3]
- 100 mA
I
latch
I/O latch-up current (0.5V
DD(IO)
) < V
I
< (1.5V
DD(IO)
);
T
j
< 125 C
- 100 mA
T
stg
storage temperature
[4]
65 +150 C
P
tot(pack)
total power dissipation
(per package)
based on package heat transfer,
not device power consumption
-1.5W
V
ESD
electrostatic discharge
voltage
human body model; all pins
[5]
2000 +2000 V