Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 12 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P1_14 R11 J8
[3]
I; PU I/O GPIO1[7] — General purpose digital input/output pin.
I U1_RXD — Receiver input for UART1.
- R — Function reserved.
I/O EMC_D7 — External memory data line 7.
O T0_MAT2 — Match output 2 of timer 0.
- R — Function reserved.
I/O SGPIO10 — General purpose digital input/output pin.
- R — Function reserved.
P1_15 T12 K8
[3]
I; PU I/O GPIO0[2] — General purpose digital input/output pin.
O U2_TXD — Transmitter output for USART2.
I/O SGPIO2 — General purpose digital input/output pin.
I ENET_RXD0 — Ethernet receive data 0 (RMII/MII interface).
O T0_MAT1 — Match output 1 of timer 0.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
P1_16 M7 H9
[3]
I; PU I/O GPIO0[3] — General purpose digital input/output pin.
I U2_RXD — Receiver input for USART2.
I/O SGPIO3 — General purpose digital input/output pin.
I ENET_CRS — Ethernet Carrier Sense (MII interface).
O T0_MAT0 — Match output 0 of timer 0.
- R — Function reserved.
- R — Function reserved.
I ENET_RX_DV — Ethernet Receive Data Valid (RMII/MII interface).
P1_17 M8 H10
[4]
I; PU I/O GPIO0[12] — General purpose digital input/output pin.
I/O U2_UCLK — Serial clock input/output for USART2 in synchronous mode.
- R — Function reserved.
I/O ENET_MDIO — Ethernet MIIM data input and output.
I T0_CAP3 — Capture input 3 of timer 0.
O CAN1_TD — CAN1 transmitter output.
I/O SGPIO11 — General purpose digital input/output pin.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description