Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 15 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P2_5 K14 D10
[4]
I; PU I/O SGPIO14 — General purpose digital input/output pin.
I CTIN_2 — SCT input 2. Capture input 2 of timer 0.
I USB1_VBUS — Monitors the presence of USB1 bus power.
Note: This signal must be HIGH for USB reset to occur.
I ADCTRIG1 — ADC trigger input 1.
I/O GPIO5[5] — General purpose digital input/output pin.
- R — Function reserved.
O T3_MAT2 — Match output 2 of timer 3.
O USB0_IND0 — USB0 port indicator LED control output 0.
P2_6 K16 G9
[3]
I; PU I/O SGPIO7 — General purpose digital input/output pin.
I/O U0_DIR — RS-485/EIA-485 output enable/direction control for USART0.
I/O EMC_A10 — External memory address line 10.
O USB0_IND0 — USB0 port indicator LED control
output 0.
I/O GPIO5[6] — General purpose digital input/output pin.
I CTIN_7 — SCT input 7.
I T3_CAP3 — Capture input 3 of timer 3.
- R — Function reserved.
P2_7 H14 C10
[3]
I; PU I/O GPIO0[7] — General purpose digital input/output pin. If this pin is pulled
LOW at reset, the part enters ISP mode using USART0.
O CTOUT_1 — SCT output 1. Match output 1 of timer 0.
I/O U3_UCLK — Serial clock input/output for USART3 in synchronous mode.
I/O EMC_A9 — External memory address line 9.
- R — Function reserved.
- R — Function reserved.
O T3_MAT3 — Match output 3 of timer 3.
- R — Function reserved.
P2_8 J16 C6
[3]
I; PU I/O SGPIO15 — General purpose digital input/output pin. Boot pin (see Table 5).
O CTOUT_0 — SCT output 0. Match output 0 of timer 0.
I/O U3_DIR — RS-485/EIA-485 output enable/direction control for USART3.
I/O EMC_A8 — External memory address line 8.
I/O GPIO5[7] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description