Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 21 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P4_6 C1 -
[3]
I; PU I/O GPIO2[6] — General purpose digital input/output pin.
O CTOUT_4 — SCT output 4. Match output 0 of timer 1.
O LCD_ENAB/LCDM — STN AC bias drive or TFT data enable input.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
I/O SGPIO12 — General purpose digital input/output pin.
P4_7 H4 -
[3]
O;
PU
O LCD_DCLK — LCD panel clock.
I GP_CLKIN — General purpose clock input to the CGU.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
I/O I2S1_TX_SCK — Transmit Clock. It is driven by the master and received by
the slave. Corresponds to the signal SCK in the I
2
S-bus specification.
I/O I2S0_TX_SCK — Transmit Clock. It is driven by the master and received by
the slave. Corresponds to the signal SCK in the I
2
S-bus specification.
P4_8 E2 -
[3]
I; PU - R — Function reserved.
I CTIN_5 — SCT input 5. Capture input 2 of timer 2.
O LCD_VD9 — LCD data.
- R — Function reserved.
I/O GPIO5[12] — General purpose digital input/output pin.
O LCD_VD22 — LCD data.
O CAN1_TD — CAN1 transmitter output.
I/O SGPIO13 — General purpose digital input/output pin.
P4_9 L2 -
[3]
I; PU - R — Function reserved.
I CTIN_6 — SCT input 6. Capture input 1 of timer 3.
O LCD_VD11 — LCD data.
- R — Function reserved.
I/O GPIO5[13] — General purpose digital input/output pin.
O LCD_VD15 — LCD data.
I CAN1_RD — CAN1 receiver input.
I/O SGPIO14 — General purpose digital input/output pin.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description