Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 22 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P4_10 M3 -
[3]
I; PU - R — Function reserved.
I CTIN_2 — SCT input 2. Capture input 2 of timer 0.
O LCD_VD10 — LCD data.
- R — Function reserved.
I/O GPIO5[14] — General purpose digital input/output pin.
O LCD_VD14 — LCD data.
- R — Function reserved.
I/O SGPIO15 — General purpose digital input/output pin.
P5_0 N3 -
[3]
I; PU I/O GPIO2[9] — General purpose digital input/output pin.
O MCOB2 — Motor control PWM channel 2, output B.
I/O EMC_D12 — External memory data line 12.
- R — Function reserved.
I U1_DSR — Data Set Ready input for UART 1.
I T1_CAP0 — Capture input 0 of timer 1.
- R — Function reserved.
- R — Function reserved.
P5_1 P3 -
[3]
I; PU I/O GPIO2[10] — General purpose digital input/output pin.
I MCI2 — Motor control PWM channel 2, input.
I/O EMC_D13 — External memory data line 13.
- R — Function reserved.
O U1_DTR — Data Terminal Ready output for UART 1. Can also be configured
to be an RS-485/EIA-485 output enable signal for UART 1.
I T1_CAP1 — Capture input 1 of timer 1.
- R — Function reserved.
- R — Function reserved.
P5_2 R4 -
[3]
I; PU I/O GPIO2[11] — General purpose digital input/output pin.
I MCI1 — Motor control PWM channel 1, input.
I/O EMC_D14 — External memory data line 14.
- R — Function reserved.
O U1_RTS — Request to Send output for UART 1. Can also be configured to
be an RS-485/EIA-485 output enable signal for UART 1.
I T1_CAP2 — Capture input 2 of timer 1.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description