Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 28 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P7_2 A16 -
[3]
I; PU I/O GPIO3[10] — General purpose digital input/output pin.
I CTIN_4 — SCT input 4. Capture input 2 of timer 1.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the transmitter and read
by the receiver. Corresponds to the signal SD in the I
2
S-bus specification.
O LCD_VD18 — LCD data.
O LCD_VD6 — LCD data.
- R — Function reserved.
I U2_RXD — Receiver input for USART2.
I/O SGPIO6 — General purpose digital input/output pin.
P7_3 C13 -
[3]
I; PU I/O GPIO3[11] — General purpose digital input/output pin.
I CTIN_3 — SCT input 3. Capture input 1 of timer 1.
- R — Function reserved.
O LCD_VD17 — LCD data.
O LCD_VD5 — LCD data.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
P7_4 C8 -
[6]
I; PU I/O GPIO3[12] — General purpose digital input/output pin.
O CTOUT_13 — SCT output 13. Match output 1 of timer 3.
- R — Function reserved.
O LCD_VD16 — LCD data.
O LCD_VD4 — LCD data.
O TRACEDATA[0] — Trace data, bit 0.
- R — Function reserved.
- R — Function reserved.
AI ADC0_4 — ADC0, input channel 4. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
P7_5 A7 -
[6]
I; PU I/O GPIO3[13] — General purpose digital input/output pin.
O CTOUT_12 — SCT output 12. Match output 0 of timer 3.
- R — Function reserved.
O LCD_VD8 — LCD data.
O LCD_VD23 — LCD data.
O TRACEDATA[1] — Trace data, bit 1.
- R — Function reserved.
- R — Function reserved.
AI ADC0_3 — ADC0, input channel 3. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description