Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 29 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
P7_6 C7 -
[3]
I; PU I/O GPIO3[14] — General purpose digital input/output pin.
O CTOUT_11 — SCT output 1. Match output 3 of timer 2.
- R — Function reserved.
O LCD_LP — Line synchronization pulse (STN). Horizontal synchronization
pulse (TFT).
- R — Function reserved.
O TRACEDATA[2] — Trace data, bit 2.
- R — Function reserved.
- R — Function reserved.
P7_7 B6 -
[6]
[13]
I; PU I/O GPIO3[15] — General purpose digital input/output pin.
O CTOUT_8 — SCT output 8. Match output 0 of timer 2.
- R — Function reserved.
O LCD_PWR — LCD panel power enable.
- R — Function reserved.
O TRACEDATA[3] — Trace data, bit 3.
O ENET_MDC — Ethernet MIIM clock.
I/O SGPIO7 — General purpose digital input/output pin.
AI ADC1_6 — ADC1, input channel 6. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
P8_0 E5 -
[4]
[13]
I; PU I/O GPIO4[0] — General purpose digital input/output pin.
I USB0_PWR_FAULT — Port power fault signal indicating overcurrent
condition; this signal monitors over-current on the USB bus (external circuitry
required to detect over-current condition).
- R — Function reserved.
I MCI2 — Motor control PWM channel 2, input.
I/O SGPIO8 — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
O T0_MAT0 — Match output 0 of timer 0.
P8_1 H5 -
[4]
I; PU I/O GPIO4[1] — General purpose digital input/output pin.
O USB0_IND1 — USB0 port indicator LED control output 1.
- R — Function reserved.
I MCI1 — Motor control PWM channel 1, input.
I/O SGPIO9 — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
O T0_MAT1 — Match output 1 of timer 0.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description