Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 45 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
PE_2 M14 -
[3]
I; PU I ADCTRIG0 — ADC trigger input 0.
I CAN0_RD — CAN receiver input.
- R — Function reserved.
I/O EMC_A20 — External memory address line 20.
I/O GPIO7[2] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_3 K12 -
[3]
I; PU - R — Function reserved.
O CAN0_TD — CAN transmitter output.
I ADCTRIG1 — ADC trigger input 1.
I/O EMC_A21 — External memory address line 21.
I/O GPIO7[3] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_4 K13 -
[3]
I; PU - R — Function reserved.
I NMI — External interrupt input to NMI.
- R — Function reserved.
I/O EMC_A22 — External memory address line 22.
I/O GPIO7[4] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
PE_5 N16 -
[3]
I; PU - R — Function reserved.
O CTOUT_3 — SCT output 3. Match output 3 of timer 0.
O U1_RTS — Request to Send output for UART 1. Can also be configured to
be an RS-485/EIA-485 output enable signal for UART 1.
I/O EMC_D24 — External memory data line 24.
I/O GPIO7[5] — General purpose digital input/output pin.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description