Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 49 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
PF_2 D11 -
[3]
I; PU - R — Function reserved.
O U3_TXD — Transmitter output for USART3.
I/O SSP0_MISO — Master In Slave Out for SSP0.
- R — Function reserved.
I/O GPIO7[17] — General purpose digital input/output pin.
- R — Function reserved.
I/O SGPIO1 — General purpose digital input/output pin.
- R — Function reserved.
PF_3 E10 -
[3]
I; PU - R — Function reserved.
I U3_RXD — Receiver input for USART3.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
- R — Function reserved.
I/O GPIO7[18] — General purpose digital input/output pin.
- R — Function reserved.
I/O SGPIO2 — General purpose digital input/output pin.
- R — Function reserved.
PF_4 D10 H4
[3]
O;
PU
I/O SSP1_SCK — Serial clock for SSP1.
I GP_CLKIN — General purpose clock input to the CGU.
O TRACECLK — Trace clock.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O I2S0_TX_MCLK — I2S transmit master clock.
I/O I2S0_RX_SCK — I2S receive clock. It is driven by the master and received
by the slave. Corresponds to the signal SCK in the I
2
S-bus specification.
PF_5 E9 -
[6]
I; PU - R — Function reserved.
I/O U3_UCLK — Serial clock input/output for USART3 in synchronous mode.
I/O SSP1_SSEL — Slave Select for SSP1.
O TRACEDATA[0] — Trace data, bit 0.
I/O GPIO7[19] — General purpose digital input/output pin.
- R — Function reserved.
I/O SGPIO4 — General purpose digital input/output pin.
- R — Function reserved.
AI ADC1_4 — ADC1, input channel 4. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description