Datasheet

LPC4370 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 2 — 21 October 2013 51 of 150
NXP Semiconductors
LPC4370
32-bit ARM Cortex-M4/M0 microcontroller
PF_9 D6 -
[6]
[13]
I; PU - R — Function reserved.
I/O U0_DIR — RS-485/EIA-485 output enable/direction control for USART0.
O CTOUT_1 — SCT output 1. Match output 1 of timer 0.
- R — Function reserved.
I/O GPIO7[23] — General purpose digital input/output pin.
- R — Function reserved.
I/O SGPIO3 — General purpose digital input/output pin.
- R — Function reserved.
AI ADC1_2 — ADC1, input channel 2. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
PF_10 A3 -
[6]
[13]
I; PU - R — Function reserved.
O U0_TXD — Transmitter output for USART0.
- R — Function reserved.
- R — Function reserved.
I/O GPIO7[24] — General purpose digital input/output pin.
- R — Function reserved.
I SD_WP — SD/MMC card write protect input.
- R — Function reserved.
AI ADC0_5 — ADC0, input channel 5. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
PF_11 A2 -
[6]
[13]
I; PU - R — Function reserved.
I U0_RXD — Receiver input for USART0.
- R — Function reserved.
- R — Function reserved.
I/O GPIO7[25] — General purpose digital input/output pin.
- R — Function reserved.
O SD_VOLT2 — SD/MMC bus voltage select output 2.
- R — Function reserved.
AI ADC1_5 — ADC1, input channel 5. Configure the pin as GPIO input and use
the ADC function select register in the SCU to select the ADC.
Table 3. Pin description
…continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
LBGA256 TFBGA100 Reset state [2] Type
Description