Datasheet

Signal/Connection Descriptions
MC56F8006/MC56F8002 Digital Signal Controller, Rev. 4
Freescale Semiconductor 25
ANB8 and
PGA1+ and
CMP0_M2
(GPIOC4)
28 5 1 7 Analog
Input
Input/
Output
Analog
Input
ANB8 and PGA1+ and CMP0_M2 — Analog input to channel 8 of
ADCB and PGA1 positive input and negative input 2 of analog
comparator 0.
Port C GPIO — This GPIO pin can be individually programmed as
an input or output pin.
When used as an analog input, the signal goes to the ANB8 and
PGA1+ and CMP0_M2.
After reset, the default state is ANB8 and PGA1+ and CMP0_M2.
ANB6 and
PGA1– and
CMP0_P4
(GPIOC5)
1 6 2 9 Input/
Output
Analog
Input
Analog
Input
ANB6 and PGA1– and CMP0_P4 — Analog input to channel 6 of
ADCB and PGA1 negative input and positive input 4 of analog
comparator 0.
Port C GPIO — This GPIO pin can be individually programmed as
an input or output pin.
When used as an analog input, the signal goes to the ANB6 and
PGA1– and CMP0_P4.
After reset, the default state is ANB6 and PGA1– and CMP0_P4.
ANB4 and
CMP1_P1
(GPIOC6)
(PWM2)
2 7 3 11 Analog
Input
Input/
Output
Output
Analog
Input
ANB4 and CMP1_P1 — Analog input to channel 4 of ADCB and
positive input 1 of analog comparator 1.
Port C GPIO — This GPIO pin can be individually programmed as
an input or output pin.
PWM2 — The PWM channel 2.
When used as an analog input, the signal goes to the ANB4 and
CMP1_P1.
After reset, the default state is ANB4 and CMP1_P1.
GPIOC7
(ANB5 and
CMP1_M2)
10 Input/
Output
Analog
Input
Input,
internal
pullup
enabled
Port C GPIO — This GPIO pin can be individually programmed as
an input or output pin.
ANB5 and CMP1_M2 — Analog input to channel 5 of ADCB and
negative input 2 of analog comparator 1.
After reset, the default state is GPIOC7.
Table 5. 56F8006/56F8002 Signal and Package Information (continued)
Signal
Name
28
SOIC
32
LQFP
32
PSDI
P
48
LQFP
Type
State
During
Reset
Signal Description