Datasheet

56F8014 Technical Data, Rev. 11
14 Freescale Semiconductor
Part 2 Signal/Connection Descriptions
2.1 Introduction
The input and output signals of the 56F8014 are organized into functional groups, as detailed in
Table 2-1. Table 2-2 summarizes all device pins. In Table 2-2, each table row describes the signal or
signals present on a pin, sorted by pin number.
Table 2-1 Functional Group Pin Allocations
Functional Group Number of Pins
Power (V
DD
or V
DDA
)2
Ground (V
SS
or V
SSA
)3
Supply Capacitors 1
Reset 1
Pulse Width Modulator (PWM) Ports
1
1. Pins in this section can function as TMR and GPIO.
5
Serial Peripheral Interface (SPI) Ports
2
2. Pins in this section can function as TMR, I
2
C, and GPIO.
4
Analog-to-Digital Converter (ADC) Ports 8
Timer Module Ports
3
3. Pins can function as PWM and GPIO.
2
Serial Communications Interface (SCI) Ports
4
4. Pins in this section can function as I
2
C and GPIO.
2
JTAG/Enhanced On-Chip Emulation (EOnCE) 4