Datasheet

56F8014 Technical Data, Rev. 11
Freescale Semiconductor 3
Rev. 9
Added the following note to the description of the TMS signal in Table 2-3:
Note: Always tie the TMS pin to V
DD
through a 2.2K resistor.
Rev. 10 • In Table 2-3, changed V
CAP
value from 4.7 μF to 2.2 μF.
•In Table 2-3, changed the input type for FAULT3 (was “Output”, is “Input”).
•In Table 2-3, changed the input type for FAULT2 (was “Input/Output”, is “Input”).
• Revised Section 7, Security Features.
• Added MC56F8014MFAE to Section 13, Ordering Information.
• Fixed miscellaneous errors.
Rev.11 • Updated temperature information in Table 10-1 and Table 10-4.
Document Revision History (Continued)
Version History Description of Change
Please see http://www.freescale.com for the most current data sheet revision.