Datasheet

DC Electrical Characteristics
56F8014 Technical Data, Rev. 11
Freescale Semiconductor 97
Table 10-6 Current Consumption per Power Supply Pin (Typical)
Mode Conditions
Typical @ 3.3V, 25°C Maximum@ 3.6V, 25°C
I
DD
1
1. No Output Switching
All ports configured as inputs
All inputs Low
No DC Loads
I
DDA
I
DD
1
I
DDA
RUN 32MHz Device Clock
Relaxation Oscillator on
PLL powered on
Continuous MAC instructions with fetches from
Program Flash
All peripheral modules enabled. Quad Timer and
PWM using 1x Clock
ADC powered on and clocked
42mA 13.5mA — —
WAIT 32MHz Device Clock
Relaxation Oscillator on
PLL powered on
Processor Core in WAIT state
All Peripheral modules enabled. Quad Timer and
PWM using 1x Clock
ADC powered off
17mA 0μA— —
STOP 4MHz Device Clock
Relaxation Oscillator on
PLL powered off
Processor Core in STOP state
All peripheral module and core clocks are off
ADC powered off
5mA 0μA— —
STANDBY > STOP 100KHz Device Clock
Relaxation Oscillator in Standby mode
PLL powered off
Processor Core in STOP state
All peripheral module and core clocks are off
ADC powered off
Voltage regulator in Standby mode
430μA0μA 550μA1μA
POWERDOWN Device Clock is off
Relaxation Oscillator powered off
PLL powered off
Processor Core in STOP state
All peripheral module and core clocks are off
ADC powered off
Voltage Regulator in Standby mode
300μA0μA 400μA1μA