Datasheet

56F8037/56F8027 Data Sheet, Rev. 8

Freescale Semiconductor 107

6.3.11.3 Digital-to-Analog Converter 1 Clock Stop Disable (DAC1_SD)—Bit 13

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.4 Digital-to-Analog Converter 0 Clock Stop Disable (DAC0_SD)—Bit 12

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.5 Reserved—Bit 11

This bit field is reserved. It must be set to 0.

6.3.11.6 Analog-to-Digital Converter Clock Stop Disable (ADC_SD)—Bit 10

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.7 Reserved—Bits 9–7

This bit field is reserved. Each bit must be set to 0.

6.3.11.8 Inter-Integrated Circuit Clock Stop Disable (I2C_SD)—Bit 6

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.9 QSCI1 Clock Stop Disable (QSCI1_SD)—Bit 5

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.10 QSCI0 Clock Stop Disable (QSCI0_SD)—Bit 4

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.11 QSPI1 Clock Stop Disable (QSPI1_SD)—Bit 3

• 0 = The clock is disabled during Stop mode

• 1 = The clock is enabled during Stop mode if the clock to this peripheral is enabled in the SIM_PCE0

6.3.11.12 QSPI0 Clock Stop Disable (QSPI0_SD)—Bit 2

Each bit controls clocks to the indicated peripheral.