Datasheet

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names
are the property of their respective owners. This product incorporates SuperFlash
®
technology licensed from SST.
© Freescale Semiconductor, Inc. 2005
Document Number: 56F8335FS
REV 0
56F8335 Memory Features
> Architecture permits as many as three
simultaneous accesses to program and
data memory
> On-chip memory includes high-speed
volatile and nonvolatile components:
• 80 KB On-chip Flash
› 64 KB of Program Flash
› 8 KB of Data Flash
› 8 KB of Boot Flash
• 4 KB of Program RAM
• 8 KB of Data RAM
> Memories operate at 60 MHz
(zero wait states) over temperature
range (-40°C to +125°C) with no
software tricks or hardware
accelerators required
> Flash security feature helps prevent
unauthorized access to its content
56F8335 Peripheral Circuit Features
> Two PWM modules with 12 outputs and
eight programmable fault inputs
> Two serial peripheral interfaces (SPIs)
> Two serial communications interfaces (SCIs)
>I
2
C communications master mode (emulated)
> Sixteen 16-bit timers with input and output
compare capability
> Two four-input quadrature decoders
> FlexCAN module, 2.0 A/B compatible
> Temperature sensing diode to monitor the
on-chip temperature
> On-chip 3.3V to 2.6V voltage regulator
> Software-programmable Phase-Lock
Loop (PLL)
> On-chip relaxation oscillator
> 12-bit ADCs with 16 inputs, self-calibration
and current injection capability
> Up to 49 general purpose input/output
(GPIO) pins
> External reset input pin for hardware reset
> Computer operating properly (COP)
> Integrated power-on reset and LVI module
Award-Winning Development Environment
> Processor Expert™ (PE) technology provides a rapid application design (RAD) tool that
combines easy-to-use, component-based software application creation with an expert
knowledge system.
> The CodeWarrior™ Integrated Development Environment (IDE) is a sophisticated tool for code
navigation, compiling and debugging. A comprehensive set of evaluation modules (EVMs)
and development system cards will support concurrent engineering. Together, PE technology,
the CodeWarrior tool suite and EVMs create a comprehensive, scalable tools solution for easy,
fast and efficient development.
56F8300
Peripheral User
Manual
56F8335/56F8135
Technical
Data Sheet
56F8335
Product Brief
DSP56800E
Reference Manual
Detailed peripheral
descriptions of the
56F8300 family of devices
Order Number:
MC56F8300UM
Electrical and timing
specifications, pin descriptions
and package descriptions
Order Number: MC56F8335
Summary description and
block diagram of the 56F8335
core, memory, peripherals
and interfaces
Order Number:
MC56F8335PB
Detailed description of the
DSP56800E architecture,
16-bit core processor and
the instruction set
Order Number:
DSP56800ERM
Product Documentation
Ordering Information
Part MC56F8335
Package Type
Low-Profile Quad Flat Pack (LQFP)
Pin Count 128
Temperature Range -40°C to +105°C
Order Number MC56F8335VFG60
Part MC56F8335
Package Type
Low-Profile Quad Flat Pack (LQFP)
Pin Count 128
Temperature Range -40°C to +125°C
Order Number MC56F8335MFG60
Learn More: For more information about Freescale products, please visit www.freescale.com.
56800E Core
60 MIPS
60 MHz
128 LQFP
COP/Watchdog
FlexCAN
Up to 49 GPIO
(16) 16-bit Timers
(2) Quadrature Decoder
Program Memory
8 KB Boot Flash
Data Memory
(4) 4-input
12-bit ADCs
(2) 6-ch. PWMs
(2) SCI
JTAG/EOnCE™
(2) SPI
Power Management
4 KB
RAM
64 KB
Flash
8 KB
RAM
8 KB
Flash
Temperature Sensor
PLL