Datasheet

56F8345 Technical Data, Rev. 17
114 Freescale Semiconductor
Preliminary
Figure 6-10 Overall Control of Pads Using SIM_GPS Control
Table 6-2 Control of Pads Using SIM_GPS Control
1
1. This applies to the four pins that serve as Quad Decoder / Quad Timer / SPI / GPIOC functions. A separate set of control
bits is used for each pin.
Pin Function
Control Registers
Comments
GPIOC_PER GPIOC_DTR
SIM_GPS
Quad Timer
SCR Register
OEN bits
GPIO Input 0 0 — —
GPIO Output 0 1 — —
Quad Timer Input /
Quad Decoder
Input
2
2. Reset configuration
1 — 0 0 See the “Switch Matrix for Inputs to the Timer”
table in the 56F8300 Peripheral User Manual
for the definition of timer inputs based on the
Quad Decoder mode configuration.
Quad Timer
Output / Quad
Decoder Input
3
3. Quad Decoder pins are always inputs and function in conjunction with the Quad Timer pins.
1— 0 1
SPI input 1 — 1 — See SPI controls for determining the direction
of each of the SPI pins.
SPI output 1 — 1 —
GPIOC_PER Register
GPIO Controlled
I/O
Pad Control
SIM_ GPS Register
Quad Timer Controlled
SPI Controlled
0
1
0
1