Datasheet

56F8346 Technical Data, Rev. 15
Freescale Semiconductor 3
Preliminary
Rev 14.0 Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2
Rev. 15
• Added the following note to the description of the TMS signal in Table 2-2:
Note: Always tie the TMS pin to V
DD
through a 2.2K resistor.
• Added the following note to the description of the TRST signal in Table 2-2:
Note: For normal operation, connect TRST
directly to V
SS
. If the design is to be used in a
debugging environment, TRST
may be tied to V
SS
through a 1K resistor.
Document Revision History (Continued)
Version History Description of Change
Please see http://www.freescale.com for the most current data sheet revision.