Datasheet

Resets
56F8355 Technical Data, Rev. 17
Freescale Semiconductor 103
Preliminary
5.7.2 ITCN After Reset
After reset, all of the ITCN registers are in their default states. This means all interrupts are disabled except
the core IRQs with fixed priorities:
• Illegal Instruction
• SW Interrupt 3
• HW Stack Overflow
• Misaligned Long Word Access
• SW Interrupt 2
• SW Interrupt 1
• SW Interrupt 0
• SW Interrupt LP
These interrupts are enabled at their fixed priority levels.