Datasheet

Stop and Wait Mode Disable Function
56F8355 Technical Data, Rev. 17
Freescale Semiconductor 121
Preliminary
All peripherals, except the COP/watchdog timer, run off the IPBus clock frequency, which is the same as
the main processor frequency in this architecture. The maximum frequency of operation is
SYS_CLK = 60MHz.
6.8 Stop and Wait Mode Disable Function
Figure 6-16 Stop Disable Circuit
Stop System clocks continue to be generated in
the SIM, but most are gated prior to
reaching memory, core and peripherals.
The only possible recoveries from Stop mode are:
1. CAN traffic (1st message will be lost)
2. Non-clocked interrupts
3. COP reset
4. External reset
5. Power-on reset
Table 6-3 Clock Operation in Power-Down Modes (Continued)
Mode Core Clocks Peripheral Clocks Description
D-FLOP
DQ
C
D-FLOP
D
Q
C
R
56800E
STOP_DIS
Permanent
Disable
Reprogrammable
Disable
Clock
Select
Reset
Note: Wait disable circuit is similar