Datasheet

56F8355 Technical Data, Rev. 17
32 Freescale Semiconductor
Preliminary
ANB0 96 Input Analog
Input
ANB0 - 3 — Analog inputs to ADC B, channel 0
ANB1 97
ANB2 98
ANB3 99
ANB4 100 Input Analog
Input
ANB4 - 7 — Analog inputs to ADC B, channel 1
ANB5 101
ANB6 102
ANB7 103
TEMP_SENSE 88 Output Analog
Output
Temperature Sense Diode — This signal connects to an on-chip
diode that can be connected to one of the ADC inputs and used to
monitor the temperature of the die. Must be bypassed with a
0.01μF capacitor.
CAN_RX 121 Schmitt
Input
Input,
pullup
enabled
FlexCAN Receive Data — This is the CAN input. This pin has an
internal pullup resistor.
To deactivate the internal pullup resistor, set the CAN bit in the
SIM_PUDR register.
CAN_TX 120 Open
Drain
Output
Open
Drain
Output
FlexCAN Transmit Data — This is the CAN output.
TC0
(GPIOE8)
111 Schmitt
Input/
Output
Schmitt
Input/
Output
Input,
pullup
enabled
TC0 - 1 — Timer C, Channels 0 and 1
Port E GPIO — These GPIO pins can be individually programmed
as input or output pins.
At reset, these pins default to Timer functionality.
To deactivate the internal pullup resistor, clear the appropriate bit
of the GPIOE_PUR register. See Part 6.5.6 for details.
TC1
(GPIOE9)
113
Table 2-2 Signal and Package Information for the 128-Pin LQFP (Continued)
Signal Name Pin No. Type
State
During
Reset
Signal Description