Datasheet

Overview
56F8356 Technical Data, Rev. 13
Freescale Semiconductor 109
Preliminary
Part 6 System Integration Module (SIM)
6.1 Overview
The SIM module is a system catchall for the glue logic that ties together the system-on-chip. It controls
distribution of resets and clocks and provides a number of control features. The system integration module
is responsible for the following functions:
• Reset sequencing
• Clock generation & distribution
• Stop/Wait control
• Pull-up enables for selected peripherals
• System status registers
• Registers for software access to the JTAG ID of the chip
• Enforcing Flash security
These are discussed in more detail in the sections that follow.
6.2 Features
The SIM has the following features:
• Flash security feature prevents unauthorized access to code/data contained in on-chip Flash memory
• Power-saving clock gating for peripheral
• Three power modes (Run, Wait, Stop) to control power utilization
— Stop mode shuts down the 56800E core, system clock, peripheral clock, and PLL operation
— Stop mode entry can optionally disable PLL and Oscillator (low power vs. fast restart); must be
explicitly done
— Wait mode shuts down the 56800E core and unnecessary system clock operation
— Run mode supports full part operation
• Controls to enable/disable the 56800E core WAIT and STOP instructions
• Calculates base delay for reset extension based upon POR or R
ESET operations. Reset delay will be either
3 x 32 clocks (phased release of reset) for reset, except for POR, which is 2
21
clock cycles
• Controls reset sequencing after reset
• Software-initiated reset
• Four 16-bit registers reset only by a Power-On Reset usable for general purpose software control
• System Control Register
• Registers for software access to the JTAG ID of the chip