Datasheet

DC Electrical Characteristics
56F8357 Technical Data, Rev. 15
Freescale Semiconductor 137
Preliminary
Table 10-8 Current Consumption per Power Supply Pin (Typical)
On-Chip Regulator Disabled (OCR_DIS = High)
Mode
I
DD_Core
I
DD_IO
1
1. No Output Switching
I
DD_ADC
I
DD_OSC_PLL
Test Conditions
RUN1_MAC
150mA 13μA50mA 2.5mA
• 60MHz Device Clock
• All peripheral clocks are enabled
• All peripherals running
• Continuous MAC instructions with
fetches from Data RAM
• ADC powered on and clocked
Wait3
86mA 13μA70μA2.5mA
• 60MHz Device Clock
• All peripheral clocks are enabled
• ADC powered off
Stop1
900μA13μA0μA155μA
• 8MHz Device Clock
• All peripheral clocks are off
• ADC powered off
• PLL powered off
Stop2
100μA13μA0μA145μA
• External Clock is off
• All peripheral clocks are off
• ADC powered off
• PLL powered off
Table 10-9. Regulator Parameters
Characteristic Symbol Min Typical Max Unit
Unloaded Output Voltage
(0mA Load)
V
RNL
2.25 — 2.75 V
Loaded Output Voltage
(200 mA load)
V
RL
2.25 — 2.75 V
Line Regulation @ 250 mA load
(V
DD
33 ranges from 3.0 to 3.6)
V
R
2.25 — 2.75 V
Short Circuit Current
( output shorted to ground)
Iss — — 700 mA
Bias Current I
bias
—5.8 7 mA
Power-down Current I
pd
—0 2μA
Short-Circuit Tolerance
(output shorted to ground)
T
RSC
— — 30 minutes