Datasheet

56F8357 Technical Data, Rev. 15

Freescale Semiconductor 3

Preliminary

Rev. 15

• Added the following note to the description of the TMS signal in Table 2-2:

Note: Always tie the TMS pin to V

through a 2.2K resistor.

• Added the following note to the description of the TRST

signal in Table 2-2:

Note: For normal operation, connect TRST

directly to V

. If the design is to be used in a debugging

environment, TRST

may be tied to V

through a 1K resistor.

Document Revision History (Continued)

Version History Description of Change

Please see http://www.freescale.com for the most current data sheet revision.