Datasheet

Register Descriptions
56F8365 Technical Data, Rev. 9
Freescale Semiconductor 117
6.5.6.3 CAN—Bit 13
This bit controls the pull-up resistors on the CAN_RX pin.
6.5.6.4 EMI_MODE—Bit 12
This bit controls the pull-up resistors on the EMI_MODE pin.
Note: In this package, this input pin is double-bonded with the adjacent V
SS
pin and this bit should be
changed to a 1 in order to reduce power consumption.
6.5.6.5 RESET—Bit 11
This bit controls the pull-up resistors on the RESET pin.
6.5.6.6 IRQ—Bit 10
This bit controls the pull-up resistors on the IRQA and IRQB pins.
6.5.6.7 XBOOT—Bit 9
This bit controls the pull-up resistors on the EXTBOOT pin.
Note: In this package, this input pin is double-bonded with the adjacent V
SS
pin and this bit should be
changed to a 1 in order to reduce power consumption.
6.5.6.8 PWMB—Bit 8
This bit controls the pull-up resistors on the FAULTB0, FAULTB1, FAULTB2, and FAULTB3 pins.
6.5.6.9 PWMA0—Bit 7
This bit controls the pull-up resistors on the FAULTA0, FAULTA1, and FAULTA2 pins.
6.5.6.10 Reserved—Bit 6
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.11 CTRL—Bit 5
This bit controls the pull-up resistors on the WR and RD pins.
6.5.6.12 Reserved—Bit 4
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.13 JTAG—Bit 3
This bit controls the pull-up resistors on the TRST, TMS and TDI pins.
6.5.6.14 Reserved—Bit 2–0
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.