Datasheet

Identifier Acceptance Filter
MC68HC908GZ16 • MC68HC908GZ8 Data Sheet, Rev. 4
Freescale Semiconductor 127
2. Two identifier acceptance filters, each to be applied to:
a. The 14 most significant bits of the extended identifier plus the SRR and the IDE bits of
CAN2.0B messages, or
b. The 11 bits of the identifier plus the RTR and IDE bits of CAN 2.0A/B messages.
Figure 12-5 shows how the 32-bit filter bank (CIDAR0–CIDAR3 and CIDMR0–CIDMR3) produces
filter 0 and 1 hits.
3. Four identifier acceptance filters, each to be applied to the first eight bits of the identifier. This mode
implements four independent filters for the first eight bits of a CAN 2.0A/B compliant standard
identifier. Figure 12-6 shows how the 32-bit filter bank (CIDAR0–CIDAR3 and CIDMR0–CIDMR3)
produces filter 0 to 3 hits.
4. Closed filter. No CAN message will be copied into the foreground buffer RxFG, and the RXF flag
will never be set.
Figure 12-4. Single 32-Bit Maskable Identifier Acceptance Filter
Figure 12-5. Dual 16-Bit Maskable Acceptance Filters
ID28 ID21IDR0
ID10 ID3IDR0
ID20 ID15IDR1
ID2 IDEIDR1
ID14 ID7IDR2
ID10 ID3IDR2
ID6 RTRIDR3
ID10 ID3IDR3
AC7 AC0CIDAR0
AM7 AM0CIDMR0
AC7 AC0CIDAR1
AM7 AM0CIDMR1
AC7 AC0CIDAR2
AM7 AM0CIDMR2
AC7 AC0CIDAR3
AM7 AM0CIDMR3
ID Accepted (Filter 0 Hit)
ID28 ID21IDR0
ID10 ID3IDR0
ID20 ID15IDR1
ID2 IDEIDR1
ID14 ID7IDR2
ID10 ID3IDR2
ID6 RTRIDR3
ID10 ID3IDR3
AC7 AC0CIDAR0
AM7 AM0CIDMR0
AC7 AC0CIDAR1
AM7 AM0CIDMR1
ID ACCEPTED (FILTER 0 HIT)
AC7 AC0CIDAR2
AM7 AM0CIDMR2
AC7 AC0CIDAR3
AM7 AM0CIDMR3
ID ACCEPTED (FILTER 1 HIT)