Datasheet

Enhanced Serial Communications Interface (ESCI) Module
MC68HC908GZ16 • MC68HC908GZ8 Data Sheet, Rev. 4
198 Freescale Semiconductor
PTY — Parity Bit
This read/write bit determines whether the ESCI generates and checks for odd parity or even parity
(see Table 15-5). Reset clears the PTY bit.
1 = Odd parity
0 = Even parity
NOTE
Changing the PTY bit in the middle of a transmission or reception can
generate a parity error.
15.8.2 ESCI Control Register 2
ESCI control register 2 (SCC2):
• Enables these CPU interrupt requests:
– SCTE bit to generate transmitter CPU interrupt requests
– TC bit to generate transmitter CPU interrupt requests
– SCRF bit to generate receiver CPU interrupt requests
– IDLE bit to generate receiver CPU interrupt requests
• Enables the transmitter
• Enables the receiver
• Enables ESCI wakeup
• Transmits ESCI break characters
SCTIE — ESCI Transmit Interrupt Enable Bit
This read/write bit enables the SCTE bit to generate ESCI transmitter CPU interrupt requests. Setting
the SCTIE bit in SCC2 enables the SCTE bit to generate CPU interrupt requests. Reset clears the
SCTIE bit.
1 = SCTE enabled to generate CPU interrupt
0 = SCTE not enabled to generate CPU interrupt
TCIE — Transmission Complete Interrupt Enable Bit
This read/write bit enables the TC bit to generate ESCI transmitter CPU interrupt requests. Reset
clears the TCIE bit.
1 = TC enabled to generate CPU interrupt requests
0 = TC not enabled to generate CPU interrupt requests
SCRIE — ESCI Receive Interrupt Enable Bit
This read/write bit enables the SCRF bit to generate ESCI receiver CPU interrupt requests. Setting the
SCRIE bit in SCC2 enables the SCRF bit to generate CPU interrupt requests. Reset clears the
SCRIE bit.
1 = SCRF enabled to generate CPU interrupt
0 = SCRF not enabled to generate CPU interrupt
Address: $0014
Bit 7654321Bit 0
Read:
SCTIE TCIE SCRIE ILIE TE RE RWU SBK
Write:
Reset:00000000
Figure 15-11. ESCI Control Register 2 (SCC2)