Datasheet
Table Of Contents
- 1 Overview
- 2 Features
- 3 Comparison with the MPC7447, MPC7445, and MPC7441
- 4 General Parameters
- 5 Electrical and Thermal Characteristics
- 6 Pin Assignments
- 7 Pinout Listings
- 8 Package Description
- 8.1 Package Parameters for the MPC7447A, 360 HCTE BGA
- 8.2 Mechanical Dimensions for the MPC7447A, 360 HCTE BGA
- 8.3 Package Parameters for the MPC7447A, 360 HCTE LGA
- 8.4 Mechanical Dimensions for the MPC7447A, 360 HCTE LGA
- 8.5 Package Parameters for the MPC7447A, 360 HCTE RoHS-Compliant BGA
- 8.6 Mechanical Dimensions for the MPC7447A, 360 HCTE RoHS-Compliant BGA
- 8.7 Substrate Capacitors for the MPC7447A, 360 HCTE
- 9 System Design Information
- 9.1 Clocks
- 9.2 PLL Power Supply Filtering
- 9.3 Decoupling Recommendations
- 9.4 Connection Recommendations
- 9.5 Output Buffer DC Impedance
- 9.6 Pull-Up/Pull-Down Resistor Requirements
- 9.7 JTAG Configuration Signals
- 9.8 Thermal Management Information
- Figure 20. BGA Package Exploded Cross-Sectional View with Several Heat Sink Options
- Figure 21. LGA Package Exploded Cross-Sectional View with Several Heat Sink Options
- 9.8.1 Internal Package Conduction Resistance
- 9.8.2 Thermal Interface Materials
- 9.8.3 Heat Sink Selection Example
- 9.8.4 Temperature Diode
- 9.8.5 Dynamic Frequency Switching (DFS)
- 10 Document Revision History
- 11 Ordering Information
MPC7447A RISC Microprocessor Hardware Specifications, Rev. 5
44 Freescale Semiconductor
System Design Information
Figure 21. LGA Package Exploded Cross-Sectional View with Several Heat Sink Options
The board designer can choose between several types of heat sinks to place on the MPC7447A. There are
several commercially-available heat sinks for the MPC7447A provided by the following vendors:
Aavid Thermalloy 603-224-9988
80 Commercial St.
Concord, NH 03301
Internet: www.aavidthermalloy.com
Alpha Novatech 408-567-8082
473 Sapena Ct. #12
Santa Clara, CA 95054
Internet: www.alphanovatech.com
Calgreg Thermal Solutions 401-732-8100
60 Alhambra Road
Warwick, RI 02886
Internet: www.calgregthermalsolutions.com
International Electronic Research Corporation (IERC) 818-842-7277
413 North Moss St.
Burbank, CA 91502
Internet: www.ctscorp.com
Tyco Electronics 717-564-0100
Chip Coolers™
P.O. Box 3608
Harrisburg, PA 17105-3608
Internet: www.chipcoolers.com
Wakefield Engineering 603-635-2800
33 Bridge St.
Pelham, NH 03076
Internet: www.wakefield.com
Ultimately, the final selection of an appropriate heat sink depends on many factors, such as thermal
performance at a given air velocity, spatial volume, mass, attachment method, assembly, and cost.
Thermal
Heat Sink
HCTE LGA Package
Heat Sink
Clip
Printed-Circuit Board
Interface Material