Datasheet

Reset and System Initialization
MC68HC908GR16A Data Sheet, Rev. 1.0
Freescale Semiconductor 177
Figure 15-5. Internal Reset Timing
Figure 15-6. Sources of Internal Reset
15.3.2.1 Power-On Reset
When power is first applied to the MCU, the power-on reset module (POR) generates a pulse to indicate
that power-on has occurred. The external reset pin (RST
) is held low while the SIM counter counts out
4096 + 32 CGMXCLK cycles. Thirty-two CGMXCLK cycles later, the CPU and memories are released
from reset to allow the reset vector sequence to occur.
At power-on, these events occur:
• A POR pulse is generated.
• The internal reset signal is asserted.
• The SIM enables CGMOUT.
• Internal clocks to the CPU and modules are held inactive for 4096 CGMXCLK cycles to allow
stabilization of the oscillator.
•The RST
pin is driven low during the oscillator stabilization time.
• The POR bit of the SIM reset status register (SRSR) is set and all other bits in the register are
cleared.
Table 15-2. Reset Recovery Type
Reset Recovery Type Actual Number of Cycles
POR/LVI 4163 (4096 + 64 + 3)
All others 67 (64 + 3)
IRST
RST
RST PULLED LOW BY MCU
IAB
32 CYCLES 32 CYCLES
VECTOR HIGH
CGMXCLK
ILLEGAL ADDRESS RST
ILLEGAL OPCODE RST
COPRST
LVI
POR
INTERNAL RESET
MODRST