Datasheet

I/O Registers
MC68HC908GR16A Data Sheet, Rev. 1.0
Freescale Semiconductor 227
NOTE
Reset the TIM counter before writing to the TIM counter modulo registers.
18.9.4 TIM Channel Status and Control Registers
Each of the TIM channel status and control registers:
• Flags input captures and output compares
• Enables input capture and output compare interrupts
• Selects input capture, output compare, or PWM operation
• Selects high, low, or toggling output on output compare
• Selects rising edge, falling edge, or any edge as the active input capture trigger
• Selects output toggling on TIM overflow
• Selects 0% and 100% PWM duty cycle
• Selects buffered or unbuffered output compare/PWM operation
Address: T1MODH, $0023 and T2MODH, $002E
Bit 7654321Bit 0
Read:
Bit 15 14 13 12 11 10 9 Bit 8
Write:
Reset:11111111
Figure 18-8. TIM Counter Modulo Register High (TMODH)
Address: T1MODL, $0024 and T2MODL, $002F
Bit 7654321Bit 0
Read:
Bit 7654321Bit 0
Write:
Reset:11111111
Figure 18-9. TIM Counter Modulo Register Low (TMODL)
Address: T1SC0, $0025 and T2SC0, $0030
Bit 7654321Bit 0
Read: CH0F
CH0IE MS0B MS0A ELS0B ELS0A TOV0 CH0MAX
Write: 0
Reset:00000000
Figure 18-10. TIM Channel 0 Status and Control Register (TSC0)
Address: T1SC1, $0028 and T2SC1, $0033
Bit 7654321Bit 0
Read: CH1F
CH1IE
0
MS1A ELS1B ELS1A TOV1 CH1MAX
Write: 0
Reset:00000000
Figure 18-11. TIM Channel 1 Status and Control Register (TSC1)